DANUBE ADRIA ASSOCIATION FOR  AUTOMATION & MANUFACTURING

                                             DAAAM International Vienna

DAAAM National Estonia

 

Online Proceedings of the 7 th International DAAAM BalticConference

"INDUSTRIAL ENGINEERING",

22-24th April 2010, Tallinn, ESTONIA, ISSN 2346-6138

 
 
 
DESIGN ENGINEERING
 
Valkonen, A., Juhanko, J., Kuosmanen, P.
Measurement of Oil Film Pressure in Hydrodynamic Journal Bearings 
Marinescu, N. I., Ghiculescu, D. & Nanu, S.
Fem Modelling of Microholes Laser Beam and Electrodischarge Machining Aided by Ultrasonics
Leopa, A. & Nastac, S.
The Impulsive Loadings Characterization, a Needful Stage in Dynamic Processes Simulation
Górski, F., Kuczko, W., Wichniarek, R., Zawadzki, P.
Application of Close-Range Photogrammetry in Reverse Engineering
Serdjuks, D., Rocens, K.
Pneumatic Cladding Element for Cable Structures 
Riečičiarová, E. & Nánási, T.
Dynamic Charakteristics of Asynchronous Motor in Steady-State Regime  
Riečičiarová, E. & Ďuriš, R.
Dynamic Measurment of Over-All Efficiency of Spiroid Gears 
Nad, M.
Modification of Modal Properties of Machining Tool Bodies 
Gonca, V., Shvab Y.
Application of Variation Methods for Calculation Elastomeric Elements of a Difficult Configuration 
Polukoshko, S., Boyko A., Kononova, O., Sokolova, S. & Jevstignejev, V.
Impact Vibration Absorber of Pendulum Type 
Randmaa, M. & Sonk, K.
Virtual Product Developing Environment in Customer-Centered Design Approach
Nánási, T.
Complex Modulus and Energy Dissipation in Damped Sandwich Structures
Hindreus, T., Kaljas, F., Martin, A., Tähemaa, T. and Reedik, V.
On Synergy Deployment in Engineering Design
Ružarovský, R., Zvolenský, R. & Velíšek, K.
Proposition of Design Methodology for Generation of Automated Assembly Devices
Mozga, N., Grinevichs, I.
Methods Used for the Threaded Joint’s Force Control 
Juhanko, J., Porkka, E., Widmaier, T. & Kuosmanen, P.
Effect of Wall Thickness Variation on Dynamic Geometry of Rotating Cylinder 
Ulbrich, E., Zoier, M., Rosenberger, M.
Dynamic Representation of Product Development Data Using Semantic Web Technologies
Widmaier, T., Kiviluoma, P., Pirttiniemi, J., Porkka, E. & Kuosmanen, P.
Thermal Effects on the Run-Out of Chilled Cast Thermo Rolls 

Stroe, I., Parvu, P.

Holonomic and Nonholonomic Constraints in Dynamics of Multibody Systems 
Pirttiniemi, J., Porkka, E., Kiviluoma, P. & Kuosmanen, P.
Correlation between Paper Quality and Calender Roll Run-Out 
Pabut, O., Eerme, M., Majak, J., Pohlak, M.
Design Optimization of Structural Components for Fatique Loading 
Zakrzhevsky, M., Кlokov, A., Yevstignejev, V., Shilvan, E. & Kragis, A.
Nonlinear Dynamics and Rare Attractors in Driven Damped Pendulum Systems 
Matsi, B., Otto, T. & Roosimölder, L.
Productivity in Innovation and New Product Development  
Grossschmidt, G. and Harf, M.
Simulation of Hydraulic Circuits in an Intelligent Programming Environment (Part 1) 
Grossschmidt, G. and Harf, M.
Simulation of Hydraulic Circuits in an Intelligent Programming Environment (Part 2) 
 
PRODUCTION ENGINEERING
 
Wagner, U., Riedel, R., Müller, M.
Innovative Procedures for Projects in Customer-Specific Machinery Engineering  
Gutakovskis, V., Bunga, G., Tormis, T.
Stainless Steel Machining with Nanocoated DuratomicTM Cutting Tools 
Ghiculescu, D., Marinescu, N. I., Jitianu, Gh. & Jiga, G.
Finite Element Analysis of Gas Bubble Influence on Ultrasonic Aided Electrodischarge Machining
Taraba, B. & Hajdu, Š.
Computer Modeling Application in Forming Processes of Sheet Metal Parts 
Vilcāns, J., & Torims, T.
Metal Stamping with Elastic Media 
Schneider, M., Klein, F. & Abt, C.
Reduction of Cooling Lubrications in the Grinding Process 
Kiviluoma, P., Porkka, E., Pirttiniemi, J. & Kuosmanen, P.
Accelerometer Based in Situ Runout Measurement of Rotors 
Bathelt, J., Politze, D. P., Jufer, N., Jönsson, A. & Kunz, A.
Factory of the Future Enabled by the Virtual Factory Framework (VFF)  
Jufer, N., Politze, D. P., Bathelt, J. & Kunz, A.
Performance Factory – A New Approach of Performance Assessment for the Factory of the Future
Masek, B., Malina, J., Cerny I., Cipera M., Hronek, P., & Jenicek, S.
Fatigue Properties of Thin Wall Semi-Products Produced by Incremental Forming Processes
Tufoi, M., Vela, I., Marta, C., Nedelcu, I., Bizau, V. & Stroia M. D.
Modernization Mechanical Plant for Withdrawal Profiles in Horizontal Continuous Casting

Maksarov, V.V., Olt, J.

Influence of Local Metastability in the Workable Material on Control of the Cutting Process
Karjust, K., Pohlak, M. & Majak, J.
Optimal Adhesion Measuring Methods of the Glass-Fiber Reinforcement Layer  
Riim, J.
Topografical Calibration Method of Coating Thickness Standards 
Laaneots, R., Riim, J. & Leibak, A.
Evalution Method of Coating Thickness of Coating Thickness Standard  
Rimašauskas, M., Bargelis, A.
Development of Intelligent Model for Estimating Manufacturing Cost in Sheet Metalworking
Velsker, T., Majak, J., Eerme, M., Pohlak, M.
Double-Curved Surface Forming Process Modeling  
Pecháček, F., Hrušková, E. & Oravcová, J.
Finish Grinding of Ceramics Materials by Ultrasound 
Fotin, A., Cismaru, I., Cismaru, M., Cosereanu, C., Brenci, L. M. & Curtu, I.
The Tool Influence on the Quality of the Birch Wood Straight Milled Surfaces  
Zawada-Tomkiewicz, A.
Surface Roughness Produced by Hard Turning With Pcbn Tools
 
PRODUCTION MANAGEMENT
 
Maloş, R. C., Andreş S. & Hamat, C. O.
Implementing Need’s Analysis Regarding the Human Resources Management in Resita City
Bjorklund, S., Pribytkova, M. & Karaulova, T.
Development the Maintenance Plan: Maintenance Activities on Operational Level  
Braun, B., Motoc, L., Olteanu, C., Zamfira, S.
Aided by Computer Optimisation for Quality Inspection Methods 
Olteanu, C., Braun, B., Zamfira, S., Motoc, L.
Comparative Study Aided by Computer for Optimal Quality Insurance Device Choosing  
Bazrafshan, M., Nahaei, V. S.
Failure Prevention in Work Study Projects with Utilizing Six Sigma Methodology 
Maceika, A. & Jančiauskas, B.
Research of a Value Orientation towards Innovativeness in the Industrial Enterprises 
Loun, K., Riives, J. & Otto, T.
Framework for Extended Use of Technological Resources in the Network of Enterprises 
Trojanowska, J. & Pająk, E.
Using the Theory of Constraints to Production Processes Improvement  
Vogt, K.
Human as an Important Factor in Process Production Control  
Politze, D. P., Bathelt, J., Reinhard, M., Jufer, N. & Kunz, A.
Interfacing Product Development and Factory Planning – Towards a Unified Life Cycle Management

Asif, F. M. A., Semere, D. T., Nicolescu, C. M. & Haumann, M.

Methods Analysis of Remanufacturing Options for Repeated Lifecycle of Starters and Alternators
Katalinic, B., Cesarec, P., Stopper, M. & Kettler, R.
Self-Organizing Systems in Nature And Technology  
Kangilaski, T.
Challenges for SMEs Entering into the Virtual Organization Partner Network 
Jõgi, G., Bashkite, V. & Karaulova, T.
Analysis of First Waste-To-Energy Plant Production Line at Kunda Nordic Cement AS 
Moseichuk, V., Bashkite, V. & Karaulova, T.
Lifecycle Extension for Industrial Equipment
Kristjuhan, K.
Lean Production, its Related Production Management Approaches and Other Contemporaries
Karjust, K., Küttner, R. & Pääsuke, K.
Adaptive Web-Based Quotation Generic Module for SME’s
Kokla, M.
The Value Creating Approach in the Estonian Engineering Industry 
Tähemaa, T., Karjust, K. & Pohlak, M.
ERP and PLM Resources in Estonian SMEs 
Tokola, H., Ahlroth, L. & Niemi, E.
Minimising Back Orders in a Multi-Item Production-Inventory System
Polyantchikov, I., Shevtshenko, E.
Collaborative Framework for Virtual Organisation 
Lemmik, R., Karjust, K., Koov, K.
Service Oriented and Model-Driven Development Methods of Information Systems  
Tammaru, T.
Excellence Models and National Quality Promotion in Estonia
 
MATERIALS ENGINEERING
 
Cosereanu, C., Lica, D., Curtu, I., Lunguleasa, A., Cismaru, I., Brenci, L. M. & Fotin, A.
Mechanical Testing of Beech Veneer Sandwich Composites
Motoc Luca, D. & Curtu, I.
A Micromechanical Based Approach for Dynamical Properties Evaluation in Case of Polymeric Composite Materials 
Krasnikovs, A., Kononova, O., Dzelzitis, K., Kharkova, G., Vagel, A. & Eiduks, M.
Investigation of Mechanical Properties of Composities Reinforced by Cotton Knitted Fabric
Mašek, B., Jirková, H., Klauberová, D., Petrenec, M. & Beran, P.
Unconventional Thermomechanical Treatment of Advanced High Strength Low-Alloyed Steel
Muiznieks, G., Gerins, E. & Ozolins, J.
Analysis of Condition Changes of Rotor Compressors Contact Surfaces  

Motoc Luca, D. & Soica, A.

Sizing the Microstructural Influence on the CTE's Variation in Case of Particle Reinforced Polymeric Composites
Joost, R., Pirso, J., Tenno, T., Viljus, M.
Effect of Free Carbon on the Mechanical and Tribological Properties of Cemented Carbides
Juhani, K., Pirso, J., Viljus, M.
Slurry erosion Wear of TiC-NiMo Cermets 
Barashkova, T., Laas, T. & Pelõhh, V.
Methods for Estimating the Damage Factor of Materials under the Influence of Plasma 
Kers, J., Križan, P., Letko, M., Šooš, L., Kask, Ü., Gregor, A.
Mechanical Recycling of Compounded Polymeric Waste and Evaluation of Briquetting Parameters
Lille, H., Kõo, J., Rybchikov, A., Toropov, S., Veinthal, R. & Surzhenkov, A.
Comparative Analysis of Residual Stresses in Flame-Sprayed and Electrodeposited Coatings Using Substrate Deformation and Hole-Drilling Methods  
Laansoo, A., Kübarsepp, J., Vainola, V.
Brazing of TiC Cermet to Steel 
Surzhenkov, A., Kulu, P., Viljus, M., Vallikivi, A., Latokartano, J.
Microstructure and Wear Resistance of the Laser Hardened PM Tool Steel Vanadis 6
Kers, J., Goljandin, D., Vilsaar, K., Tall, K., Mikli, V., Zuo, X., Zhang, L., Schuman, T.
Characterization of Disintegrator Milled Electronic Waste Powders for Materials Recovery
Kommel, L.
New Technique for Characterization of Microstructure of the Nickel-Base Superalloy 
Lind, L., Peetsalu, P., Põdra, P., Adoberg, E., Veinthal, R., Kulu, P.
Evaluation of Punch Wear Mechanism During Fine Blanking Process 
Antonov, M., Hussainova, I., Pirso, J. & Juhani, K.
Effect of Oxidation on Abrasive Wear Behaviour of TiC-Based Cermets In SiO2 Medium  
Kõo, J. & Valgur, J.
Determination of Residual Stresses in Coated Plates Using Layer Growing/Removing Methods: 100th Anniversary of Stoney’s Equations
 
MECHATRONICS AND SYSTEM ENGINEERING
 
Kulderknup, E., Raba, K.
Improvement of Circuit Boards Testing Set Calibration  
Hudjakov, R., Tamre, M.
Aerial Imagery Terrain Classification for Long-Range Autonomous Navigation  
Väljaots, E. & Sell, R.
Measurement Method and Device for Vehicle Dynamics
Hiiemaa, M. & Tamre, M.
Intelligent Energy Management of Unmanned Ground Vehicle
Juurma, M., Tamre, M.
Improvement of Timber Code Reading Methods  

Põlder, A., Abiline, I., Tamre, M.

Automatic Visual Code Quality Evaluation for Wood Industry
Tiimus, K. & Tamre, M.
Camera Gimbal Control System for Unmanned Platforms  
Seiler, S. & Sell, R.
Virtual Academy Platform Supported by a Semantic Knowledge Base
Aruväli, T., Serg, R., Preden, J. & Otto, T.
Smart Dust Applications in Production Environment  
Sarkans, M. & Roosimölder, L.
Welding Robot Cell Implementation in SME-s Using Modular Approach 
Lemmik, R.
An OLAP Cube Based Development Method of Information Systems